Typically, the cable connector has been called the cable head, which is mainly after being laid in the cable line, in order to make a certain connection between cables, and therefore the use of such a good sealing to the cable connector connecting both ends to form a whole, in order to facilitate future transmission circuit, and to ensure that the process of the transmission will therefore fail.

Currently, cable manufacturers cable manufactured by it then has certain standards and requirements, different areas of its use, the cable specifications and dimensions will therefore vary, so the cable can not reach a certain length of time, you need to use this cable connector to connect the cable will need to be connected at both ends, so as to achieve the purpose of use.

Because of this the cable connector is relatively large models and sizes, therefore, can be divided into two major categories of outdoor and indoor use products, and they can be divided according to the heat shrinkable material and dry-inclusive, and epoxy mastic material connection head. Currently on the market is the most commonly used are heat shrinkable cable joints; according to its texture into the texture contained lug lug can be divided into copper and aluminum lugs.

Use cable connector between the cable is connected to the main supply area in order to make the current flow can be normal, smooth lines at the same time ensures that the cable connections sealing well, therefore, such a cable connector is often applied at the connection between the cable and has good insulating effect, to use a certain security and reliability, thus becoming one of many power sector general wiring material.